Black Friday floor jack deals favor the Jack Boss 3 Ton Low Profile for many home garages because its 3 15/16 inch entry height, 18 5/16 inch maximum lift, and 6,600 pound capacity cover low cars, SUVs, and several larger vehicles. Buyers should still match lift points, vehicle weight, and clearance from the vehicle manual before purchase, since a sale event does not fix a poor fit.
Specifications
| Color | Red |
|---|---|
| Size | 3 Ton Aluminum |
| Dimensions | 23.6 x 11.8 x 6.3 inches |
| Weight | 58.5 pounds |
| Product Group | Automotive Parts and Accessories |
Specifications
| Color | Multi-color |
|---|---|
| Dimensions | 23.38 x 9.21 x 6.26 inches |
| Weight | 30 pounds |
| Product Group | Automotive Parts and Accessories |
| Binding | Automotive |
Pros
- High 6,600-pound lifting capacity
- High-clearance range suited to pickups, full-size SUVs, crossovers, and vans
- Rubber saddle pad and controlled-release valve support secure, gradual lowering
- Handle disassembles for more compact storage
Cons
- Vehicle frame clearance should be measured to confirm fit, especially for sedans
- The listed 7.1- to 20.9-inch range may not suit vehicles outside that clearance range
Specifications
| Color | Blue |
|---|---|
| Dimensions | 23.4 x 7.4 x 7.5 Inches |
| Weight | 36.3 Pounds |
| Product Group | Automotive Parts and Accessories |
Best For / Avoid If
Best for buyers prioritizing
- High 6,600-pound lifting capacity
- High-clearance range suited to pickups, full-size SUVs, crossovers, and vans
- Rubber saddle pad and controlled-release valve support secure, gradual lowering
Consider another option if
- Vehicle frame clearance should be measured to confirm fit, especially for sedans
- The listed 7.1- to 20.9-inch range may not suit vehicles outside that clearance range
Pros
- Provides a 5.1-inch minimum lifting height for low-profile access
- Supports vehicles up to 4,000 pounds
- Includes an overload protection safety release valve
- Steel construction and swivel casters support positioning and stability
Cons
- Not recommended for pickups, trucks, or oversized SUVs
- Designed for lifting only and cannot serve as a jack stand
- Not suitable for side-force or downward-force applications
Specifications
| Color | Black |
|---|---|
| Size | 2 Ton |
| Dimensions | 10 x 19 x 8 inches |
| Weight | 21.488015752616 pounds |
| Product Group | Automotive Parts and Accessories |
| Binding | Automotive |
Best For / Avoid If
Best for buyers prioritizing
- Provides a 5.1-inch minimum lifting height for low-profile access
- Supports vehicles up to 4,000 pounds
- Includes an overload protection safety release valve
Consider another option if
- Not recommended for pickups, trucks, or oversized SUVs
- Designed for lifting only and cannot serve as a jack stand
- Not suitable for side-force or downward-force applications
Pros
- High 3-ton lifting capacity for home, repair-shop, and fleet-maintenance use
- Low-profile lifting range covers the listed sedan, SUV, and light-truck compatibility claims
- Includes dual-piston lifting, overload protection, and controlled lowering features
- Steel frame is described as resistant to deformation under pressure
Specifications
| Color | GREEN |
|---|---|
| Dimensions | 28.3464 x 13.58265 x 6.2992 inches |
| Weight | 70 Pounds |
| Product Group | Automotive Parts and Accessories |
Best For / Avoid If
Best for buyers prioritizing
- High 3-ton lifting capacity for home, repair-shop, and fleet-maintenance use
- Low-profile lifting range covers the listed sedan, SUV, and light-truck compatibility claims
- Includes dual-piston lifting, overload protection, and controlled lowering features
What Black Friday Floor Jack Deals Actually Need to Solve
Floor jack shopping has three separate fit questions: will the jack slide under the vehicle, will it reach the vehicle’s lifting point, and can its capacity handle the load within the vehicle maker’s instructions? A low entry height helps lowered sedans. A higher maximum height matters for SUVs, pickups, vans, and vehicles with more suspension travel.
Rated capacity also needs context. A 3 ton label describes the jack’s rated lifting capacity, not permission to lift any part of any vehicle. The vehicle’s total weight, the portion being lifted, the selected lift point, and the surface all matter. Use a level, firm surface and support a raised vehicle with properly rated jack stands. A floor jack is for lifting, not for holding a vehicle during work.
Black Friday listings can change quickly. The products below show observed prices from budget to premium, but no product should be treated as discounted unless the live retailer page shows a real reduction. Check the current price, delivery terms, warranty language, and return policy before ordering. CarTechTalk may earn a commission from qualifying purchases through retailer links.
Quick Comparison of These Floor Jack Deals
| Product | Capacity | Lift range | Construction | Best fit |
|---|---|---|---|---|
| Jack Boss 3 Ton Low Profile | 3 tons, 6,600 lb | 3 15/16 to 18 5/16 in | Aluminum and steel | Low cars, SUVs, MPVs, travel trailers, wagons, minibuses |
| AV Steel Low Profile Floor Jack 2.5 Ton | 2.5 tons, 5,000 lb | 3.4 to 14.6 in | Steel | Cars, coupes, hatchbacks, sedans |
| AUTOWN 3 Ton Floor Jack, Alloy Steel Hydraulic Car | 3 tons, 6,600 lb | 7.1 to 20.9 in | Alloy steel | Pickups, full-size SUVs, crossovers, vans |
| DNA Motoring TOOLS-00234 Low Profile Hydraulic | 2 tons, 4,000 lb | 5.1 to 13 in | Steel | Most cars up to 4,000 lb |
| SATA 3-Ton Heavy-Duty Steel Floor Jack | 3 tons, 6,600 lb | 3 3/4 to 19 1/8 in | Steel | Low cars, SUVs, light trucks, frequent garage use |
Best Black Friday Floor Jack Deals by Vehicle and Use
Jack Boss 3 Ton Low Profile: Best mixed-vehicle choice
Jack Boss 3 Ton Low Profile gives one of the broadest fit ranges here. Its 3 15/16 inch minimum height targets low-clearance vehicles, while its 18 5/16 inch maximum height reaches beyond the needs of many ordinary sedans. The 3 ton rating also gives it more capacity than the 2 ton and 2.5 ton choices in this group.
The aluminum and steel build may appeal to a garage that needs a balance between a large lifting range and easier movement than a fully steel design might offer. The listing includes steel casters, swivel front casters, a two-piece handle, and a rubber saddle. Dual pistons aim to reduce the number of pumps needed to reach working height.
Its drawback is weight: the listed net weight is 58.5 pounds. That can make carrying it between storage and driveway work less convenient. The one-year manufacturer warranty is shorter than the ownership horizon many buyers expect from a shop tool.
Best for: A home mechanic who works on both low cars and taller SUVs or utility vehicles.
Skip it if: You need a light jack for frequent transport, or your vehicle needs more than 18 5/16 inches of lift at its approved lifting point.
See the aluminum frame floor jack guide for more context on material and portability tradeoffs.
AV Steel Low Profile Floor Jack 2.5 Ton: Best budget pick for cars
AV Steel Low Profile Floor Jack 2.5 Ton targets passenger cars rather than trucks. Its 3.4 inch entry height suits sports cars, lowered sedans, coupes, and hatchbacks that reject taller jacks. The 14.6 inch maximum height gives enough reach for many car repairs, but it limits the vehicles and lift points it can serve.
The steel frame favors a conventional garage setup. A single-piston pump raises the saddle, while rear rotating wheels help reposition the jack. The listing also describes a 360-degree rotating saddle and an overload protection valve. Those features support positioning and load control, but they do not replace correct lift-point selection or jack stands.
The clear limitation is fitment. The manufacturer says this jack is not recommended for trucks, SUVs, or lifted vehicles. Its 2.5 ton capacity also leaves less rated capacity than the 3 ton choices here.
Best for: Owners of low passenger cars who want a lower-cost floor jack for routine wheel and brake work.
Skip it if: You own an SUV, pickup, lifted vehicle, or any car whose approved lift point sits above 14.6 inches.
AUTOWN 3 Ton Floor Jack, Alloy Steel Hydraulic Car: Best for tall vehicles
AUTOWN 3 Ton Floor Jack, Alloy Steel Hydraulic Car starts at 7.1 inches and rises to 20.9 inches. That range favors pickups, full-size SUVs, crossovers, and vans with more ground clearance. The upper limit is the highest in this group, giving tall vehicles more usable reach than low-profile car jacks.
The 6,600 pound rating and alloy steel construction suit heavier garage work, while the cross-shaped rubber pad is intended to fit round and flat frame points. A quick-connect handle can be removed for flatter storage. Casters support repositioning around a garage floor.
Its low-end clearance is the tradeoff. A 7.1 inch minimum height may not fit a low sedan or a vehicle with a deflated tire. The listing also tells sedan owners to check frame clearance, so this is not a general-purpose choice for every household.
Best for: Pickup and SUV owners who need high lift range more than low entry clearance.
Skip it if: You work on lowered cars, sports cars, or sedans with less than 7.1 inches of clearance at the lift point.
For truck owners, the pickup truck floor jack guide covers lift height and tonnage decisions in greater detail.
DNA Motoring TOOLS-00234 Low Profile Hydraulic: Best low-cost basic car jack
DNA Motoring TOOLS-00234 Low Profile Hydraulic is the budget-oriented option in this group. Its 2 ton, or 4,000 pound, capacity is aimed at most cars rather than large trucks or big SUVs. The 5.1 inch minimum height works for some standard cars, while the 13 inch maximum height keeps its use focused on lower repairs.
Steel construction, swivel casters, a large saddle, and an overload release valve cover the basic features expected from a garage trolley jack. Its compact lift range can be useful when the vehicle’s approved lift point sits within those limits.
The main drawback is restricted capacity and reach. The manufacturer specifically advises against pickups, trucks, and oversized SUVs. The 13 inch maximum also rules out many lifting points that need extra suspension extension.
Best for: A car owner who needs an inexpensive jack for a compatible vehicle and occasional lifting.
Skip it if: Your vehicle weighs more than 4,000 pounds, needs a taller lift, or belongs to the truck and large SUV class.
The listing states that this jack is for lifting only and must not hold a vehicle for prolonged work. Place approved jack stands before entering beneath a raised vehicle. Read the vehicle and jack manuals for lift points, surface limits, and operating instructions.
SATA 3-Ton Heavy-Duty Steel Floor Jack: Best for repeated garage use
SATA 3-Ton Heavy-Duty Steel Floor Jack combines a 2 11/16 inch ultra-low profile claim in its product title with a listed operating range of 3 3/4 to 19 1/8 inches. That gives it low entry clearance and more upper reach than the Jack Boss option. Its 6,600 pound capacity covers the same rated class as the other 3 ton choices.
The steel frame targets frequent garage or fleet use. SATA describes a dual-piston pump, overload protection, and a slow-release system for controlled lowering. The manufacturer also says each unit is subjected to a 1.5 times overload procedure before leaving the factory and that the design meets ANSI requirements. These are manufacturer claims, not a guarantee that every vehicle or work surface is safe.
Steel construction and the premium position can mean more weight and a less convenient carry than a compact car jack. Its 3 3/4 inch listed minimum also deserves attention because the title and operating range use different low-height figures.
Best for: A garage that wants a 3 ton steel jack with very low entry height and high lift reach.
Skip it if: You need the lightest portable option, or the exact minimum height at your vehicle’s lift point does not fit the listed operating range.
How to Judge a Floor Jack Deal During Black Friday
Start with entry height
Measure the clearance at the approved lift point, not only the lowest body panel. A jack can slide under a bumper and still fail to reach the correct structural point. Lowered cars usually need the 3.4 inch or lower options. A 5.1 inch jack may suit a standard sedan but cannot be assumed to fit every car.
Then check maximum height
Maximum height matters for frame clearance, suspension work, and vehicles with tall sidewalls or long suspension travel. The AUTOWN jack reaches 20.9 inches, while the DNA Motoring jack reaches 13 inches. Those are different use cases, not small variations.
Match rated capacity without using a shortcut
Do not apply a universal percentage rule to decide whether a jack fits. Vehicle weight distribution changes by model, axle, cargo load, and lift point. Follow the vehicle manual and jack instructions. A 3 ton rating does not automatically make a jack suitable for a loaded van, a trailer, or a particular lifting position.
Treat sale price as one ownership cost
A low purchase price can lose its appeal if the jack cannot reach your vehicle or requires a second jack for another vehicle. Warranty length, storage space, transport weight, saddle shape, wheel movement, and replacement support affect long-term value. A jack that fits two household vehicles may cost less than buying separate car and SUV models later.
Who Should Skip These Black Friday Floor Jack Deals
Skip this group if you need a jack for a vehicle outside the stated capacity or lift range, work on unstable ground, or expect one tool to cover lowered cars and tall trucks equally well. Also skip any floor jack if the job requires sustained support without jack stands. Buyers with heavy-duty commercial vehicles, unusual chassis designs, or uncertain lift points should look for equipment specified for that vehicle class and seek qualified guidance before lifting.
These options also do not replace a complete support setup. Add properly rated jack stands when work continues after lifting, and use a wheel chock where the vehicle manual calls for one. Never rely on hydraulic pressure alone beneath a vehicle.
Final Verdict on Black Friday Floor Jack Deals
Jack Boss 3 Ton Low Profile is the strongest fit for a mixed household garage because it combines low entry height, a 3 ton rating, and nearly 18 1/2 inches of lift. SATA is the more shop-oriented alternative for buyers who want a steel 3 ton jack with higher reach. AUTOWN makes more sense for tall trucks and SUVs, while AV Steel is better matched to low passenger cars. DNA Motoring suits a compatible car owner who values a low purchase position above capacity and lift range.
Buy based on fit first, then capacity, storage, and sale price. A genuine Black Friday bargain is useful only when the jack reaches the approved lift point and leaves a safe path to jack-stand support.
For the support equipment that follows lifting, review the jack stands under $75 guide. Keep the Floor Jacks and Vehicle Lifting category bookmarked for related garage equipment.
