The best floor jack for lifted trucks in this group is BIG RED T83006 Torin Hydraulic Trolley, whose 5-7/8-inch minimum and 20-7/8-inch maximum lift range suit some higher-clearance trucks. For a truck needing more reach, Powerbuilt 3 Ton, Bottle Jack and Jack Stands lifts from 11 to 21 inches, but its narrow lifting arrangement differs from a rolling floor jack.
Specifications
| Color | yellow |
|---|---|
| Size | 2.5T |
| Dimensions | 22.2 x 8.7 x 5.2 Inches |
| Weight | 29.982867632 pounds |
| Product Group | Automotive Parts and Accessories |
| Binding | Automotive |
Pros
- Combines lifting and support functions in one unit
- Wide base supports use on softer surfaces and for RV or trailer leveling
- Lift range and capacity are specified for trucks, SUVs, vans, and Jeeps
- Built-in ratcheting safety bar provides a locking support feature
Cons
- The listing describes the capacity inconsistently: the title states 6,000 pounds, while the feature information states 3,000 pounds
- The source data lists an Amazon rating of 4.7 from 0 reviews
Specifications
| Color | Black |
|---|---|
| Size | 6000lb, Unijack |
| Dimensions | 9.88 x 9.75 x 11.5 inches |
| Weight | 22.66 pounds |
| Product Group | Automotive Parts and Accessories |
| Binding | Automotive |
Best For / Avoid If
Best for buyers prioritizing
- Combines lifting and support functions in one unit
- Wide base supports use on softer surfaces and for RV or trailer leveling
- Lift range and capacity are specified for trucks, SUVs, vans, and Jeeps
Consider another option if
- The listing describes the capacity inconsistently: the title states 6,000 pounds, while the feature information states 3,000 pounds
- The source data lists an Amazon rating of 4.7 from 0 reviews
Specifications
| Color | Red |
|---|---|
| Size | 3 Ton Aluminum |
| Dimensions | 23.6 x 11.8 x 6.3 inches |
| Weight | 58.5 pounds |
| Product Group | Automotive Parts and Accessories |
Pros
- 4-ton capacity suits compatible cars, SUVs, vans, and pickup trucks
- Dual piston pump supports faster lifting than single-piston designs
- Steel construction and 87.3-pound weight support stability
- Rotatable saddle and rear wheels aid positioning
Cons
- 87.3-pound full-size design may be difficult to move or store
- Not recommended for sports cars, RVs, heavy commercial trucks, or lifted vehicles
- 4-1/4-inch minimum lift height may not suit vehicles with low ground clearance
Specifications
| Color | Black |
|---|---|
| Dimensions | 31.69 x 14.56 x 8.07 Inches |
| Product Group | Automotive Parts and Accessories |
Best For / Avoid If
Best for buyers prioritizing
- 4-ton capacity suits compatible cars, SUVs, vans, and pickup trucks
- Dual piston pump supports faster lifting than single-piston designs
- Steel construction and 87.3-pound weight support stability
Consider another option if
- 87.3-pound full-size design may be difficult to move or store
- Not recommended for sports cars, RVs, heavy commercial trucks, or lifted vehicles
- 4-1/4-inch minimum lift height may not suit vehicles with low ground clearance
Pros
- High 6,600-pound lifting capacity
- High-clearance range suited to pickups, full-size SUVs, crossovers, and vans
- Rubber saddle pad and controlled-release valve support secure, gradual lowering
- Handle disassembles for more compact storage
Cons
- Vehicle frame clearance should be measured to confirm fit, especially for sedans
- The listed 7.1- to 20.9-inch range may not suit vehicles outside that clearance range
Specifications
| Color | Blue |
|---|---|
| Dimensions | 23.4 x 7.4 x 7.5 Inches |
| Weight | 36.3 Pounds |
| Product Group | Automotive Parts and Accessories |
Best For / Avoid If
Best for buyers prioritizing
- High 6,600-pound lifting capacity
- High-clearance range suited to pickups, full-size SUVs, crossovers, and vans
- Rubber saddle pad and controlled-release valve support secure, gradual lowering
Consider another option if
- Vehicle frame clearance should be measured to confirm fit, especially for sedans
- The listed 7.1- to 20.9-inch range may not suit vehicles outside that clearance range
Pros
- High 20-7/8-inch maximum lift height for SUVs and extended-height trucks
- 6,000-pound capacity is listed for cars, trucks, vans, and SUVs
- 360-degree swivel casters support maneuverability
- Includes a limited one-year manufacturer warranty
Cons
- The listed minimum lifting height is 5-7/8 inches, so lower-clearance compatibility is not established
- The manufacturer warranty is limited to one year
- The listing does not include a detailed specifications array
Best For / Avoid If
Best for buyers prioritizing
- High 20-7/8-inch maximum lift height for SUVs and extended-height trucks
- 6,000-pound capacity is listed for cars, trucks, vans, and SUVs
- 360-degree swivel casters support maneuverability
Consider another option if
- The listed minimum lifting height is 5-7/8 inches, so lower-clearance compatibility is not established
- The manufacturer warranty is limited to one year
- The listing does not include a detailed specifications array
Pros
- Supports standard cars, SUVs, minivans, and standard pickup trucks
- Provides a wide lift range for the listed vehicle applications
- Includes overload protection and a rotating saddle
- Meets ANSI/ASME PASE safety standards
Cons
- Not suitable for lifted vehicles, heavy-duty trucks, or RVs
- The 63.8-lb steel construction may be difficult to move
- Single-piston design may require more strokes than the brand's dual-piston model
Specifications
| Color | Multi color |
|---|---|
| Dimensions | 26.4 x 14.2 x 8.3 inches |
| Weight | 63.9 pounds |
| Product Group | Automotive Parts and Accessories |
Best For / Avoid If
Best for buyers prioritizing
- Supports standard cars, SUVs, minivans, and standard pickup trucks
- Provides a wide lift range for the listed vehicle applications
- Includes overload protection and a rotating saddle
Consider another option if
- Not suitable for lifted vehicles, heavy-duty trucks, or RVs
- The 63.8-lb steel construction may be difficult to move
- Single-piston design may require more strokes than the brand's dual-piston model
Pros
- The 3-ton capacity and 6,600-pound rating support a range of vehicle-lifting applications
- The low minimum height is intended for vehicles with limited ground clearance
- Dual pistons are designed to reduce the number of handle strokes needed for lifting
- The jack is listed as meeting ANSI/ASME PASE safety standards
Cons
- The listed Amazon rating is shown as 4 from 0 reviews, so no review count is available to provide context
Best For / Avoid If
Best for buyers prioritizing
- The 3-ton capacity and 6,600-pound rating support a range of vehicle-lifting applications
- The low minimum height is intended for vehicles with limited ground clearance
- Dual pistons are designed to reduce the number of handle strokes needed for lifting
Consider another option if
- The listed Amazon rating is shown as 4 from 0 reviews, so no review count is available to provide context
Pros
- High 8,000-lb capacity supports general and heavy-duty industrial use
- Low starting height provides access under low-profile vehicles
- Wide stance adds stability under load
- Dual-piston pump supports faster lifting than a single pump
Cons
- 100.8-pound weight makes transport and storage less convenient
- 4-ton capacity exceeds needs of some vehicle owners
Specifications
| Color | Red |
|---|---|
| Size | 4 Ton (8,000 lb) dual pump quick lift |
| Dimensions | 7.9 x 15.8 x 31.2 inches |
| Weight | 100.8 pounds |
| Product Group | Automotive Parts and Accessories |
| Binding | Automotive |
Best For / Avoid If
Best for buyers prioritizing
- High 8,000-lb capacity supports general and heavy-duty industrial use
- Low starting height provides access under low-profile vehicles
- Wide stance adds stability under load
Consider another option if
- 100.8-pound weight makes transport and storage less convenient
- 4-ton capacity exceeds needs of some vehicle owners
Pros
- Supports multiple vehicle and equipment types
- Combines floor-jack functions with transmission lifting
- Includes tie-down loops and locking safety bar
- Listed as meeting or exceeding ASME and PALD standards
Cons
- 79.2-pound weight makes it heavy to move
- 2-ton capacity limits supported load
Specifications
| Color | Silver |
|---|---|
| Size | 2 Ton |
| Dimensions | 17 x 27 x 8.5 Inches |
| Weight | 79.2 Pounds |
| Product Group | Automotive Parts and Accessories |
| Binding | Automotive |
Best For / Avoid If
Best for buyers prioritizing
- Supports multiple vehicle and equipment types
- Combines floor-jack functions with transmission lifting
- Includes tie-down loops and locking safety bar
Consider another option if
- 79.2-pound weight makes it heavy to move
- 2-ton capacity limits supported load
Match jack height to your lifted truck
Affiliate disclosure: CarTechTalk may earn a commission from qualifying purchases. That does not change the fit limits below.
Lifted trucks need two separate measurements checked against the jack: clearance at the approved lift point before lifting, and the height needed to raise the vehicle enough for the job. A jack can reach the frame and still fail to lift the tire clear, or reach the needed height but not fit beneath the truck.
Measure the actual clearance at the lift point with the truck on level ground. Then check the jack’s stated minimum and maximum lift heights. The tire, suspension, and selected lift point affect how much height a particular job needs, so a maximum number alone cannot prove fit.
Capacity matters too, but a jack’s rated capacity does not establish that it suits every truck. Follow the vehicle and jack manuals for approved lift points, load limits, and setup. Never work beneath a vehicle supported only by a hydraulic jack. Use correctly rated stands on a suitable surface, or a product’s locking support only as its instructions allow.
| Jack | Rated capacity | Lift range | Best fit |
|---|---|---|---|
| BIG RED T83006 Torin Hydraulic Trolley | 3 tons | 5-7/8 to 20-7/8 inches | Higher trucks and SUVs |
| Powerbuilt 3 Ton, Bottle Jack and Jack Stands | 3,000 pounds | 11 to 21 inches | Trucks needing a high starting point |
| AUTOWN 3 Ton Floor Jack | 6,600 pounds | 7.1 to 20.9 inches | Pickups and full-size SUVs |
| Big RED 4 Ton Low Profile | 4 tons | 3-7/8 to 20 inches | Truck owners needing greater rated capacity |
Best floor jacks for lifted trucks
Best rolling jack for higher trucks: BIG RED T83006 Torin Hydraulic Trolley
The BIG RED T83006 Torin Hydraulic Trolley offers a 20-7/8-inch maximum lift and an extra-long saddle neck, features intended to reduce the gap between a jack and a higher vehicle. Its 3-ton capacity and truck and SUV fit make it the clearest rolling-jack match here for a lifted truck that falls within its limits. The single-piston pump and 24.5-inch handle are useful context for owners who move the jack often or want fewer handle strokes.
The 5-7/8-inch minimum height rules it out if a truck’s approved lift point sits lower than that. Its 3-ton rating may also be insufficient for a vehicle or lift point that requires a higher-rated tool. Skip it if the measured clearance or required lift height falls outside its range.
Best for a high starting point: Powerbuilt 3 Ton, Bottle Jack and Jack Stands
This Powerbuilt combines a bottle jack with a ratcheting safety bar, and its stated 11-to-21-inch range targets pickups, SUVs, vans, and Jeeps. The starting height is the key tradeoff: it can reach a high truck lift point that a lower-range jack may not suit, but it cannot fit a lower lift point below 11 inches.
The rated capacity is 3,000 pounds, so do not treat it as interchangeable with a 3-ton jack. The integrated stand changes how it supports a raised vehicle, but it does not remove the need to follow the product and vehicle instructions. Skip it if your truck’s specified load requirement exceeds its rating or if the high minimum height prevents proper positioning.
Best conventional floor jack for pickups: AUTOWN 3 Ton Floor Jack
AUTOWN lists a 6,600-pound capacity and a 7.1-to-20.9-inch lift range for pickups, full-size SUVs, crossovers, and vans. Its upper reach comes close to the two higher-range options above, while the alloy-steel construction and casters suit garage use. A cross-shaped rubber saddle pad is intended to grip compatible flat or round lift points.
The 7.1-inch minimum is a firm limit, and the product description says to measure frame clearance, especially on lower vehicles. Its 20.9-inch maximum may not provide enough lift for a substantially raised truck or a job requiring more wheel clearance. Skip it if your truck’s lift point sits outside the range or its manual calls for a different support method.
Best higher-capacity option: Big RED 4 Ton Low Profile
This Big RED jack combines an 8,000-pound rating with a 20-inch maximum and a 3-7/8-inch minimum. That wider capacity margin may suit a truck owner whose load requirements call for more than a 3-ton model, while its low minimum can help with vehicles that have lower access points. The dual-piston pump is listed as lifting faster than a single-pump design.
Its 20-inch maximum is lower than the other three picks above, so the capacity does not solve a height mismatch. Skip it if the truck needs more than 20 inches at the selected lift point, or if the required jack clearance is below its minimum.
Why several jacks here may not fit a lifted truck
Maximum lift height separates truck-capable jacks from jacks specifically suited to a particular lifted vehicle. The VEVOR 2.5 Ton Low Profile reaches 14.96 inches, while the Jack Boss 3 Ton Low Profile reaches 18-5/16 inches. Those limits may suit some truck jobs, but neither is a safe default for a truck whose lift point needs greater reach.
The AV Steel Heavy-Duty Floor Jack 4 Ton reaches 19-3/4 inches, yet its product description explicitly excludes lifted vehicles. The AV Steel 3 Ton Floor Jack likewise says it is not for lifted vehicles. Their listed capacity or maximum height does not override that stated restriction.
The AV Steel Low Profile Floor Jack 3 Ton reaches 19-7/8 inches and has a 3-1/8-inch minimum, but its description focuses on low-riding vehicles rather than lifted trucks. BIG RED’s 4-ton jack is described for trucks and SUVs, but its 20-inch ceiling may not cover a high lift point. Powerbuilt 2 Ton Triple Lift is a multi-vehicle jack, but its listed information gives no lift range for judging a lifted truck’s required reach. These options need unusually careful fitment checks, not a blanket lifted-truck recommendation.
Skip every jack in this guide if the truck’s required lift point, load rating, or lift height cannot be matched to the jack instructions. Look for a truck-rated high-lift floor jack or another lifting system specified for that vehicle and job. Never make up for insufficient reach with blocks or improvised extensions.
Safe setup matters as much as reach
Position the jack only at lift points approved by the vehicle maker. Use a firm, level surface, and do not rely on a floor jack alone while working under a truck. A wide base or overload valve is not a substitute for correct positioning and support.
Gravel can shift under a load, so read why a floor jack should not be used on gravel before choosing a work area. For lifting equipment standards, ASME’s Safety Standard for Portable Automotive Service Equipment explains the scope of its PASE standard. Neither a standard reference nor a product feature replaces the manuals for your truck and jack.
Related reading: Floor Jack Capacity Guide and Floor Jack Buying Guide.
Final pick depends on measured reach
For a lifted truck that fits its stated range, BIG RED T83006 Torin Hydraulic Trolley is the strongest rolling-floor-jack choice here because it combines truck and SUV use with a 20-7/8-inch maximum and an extended saddle neck. Choose the Powerbuilt only when its 11-inch minimum suits the lift point and its 3,000-pound capacity meets the vehicle’s requirements. AUTOWN offers a conventional 3-ton alternative with a similar upper reach, while Big RED’s 4-ton model trades some reach for a higher rating.
There is no universal winner for every lifted truck. Compare the truck’s approved lift point, starting clearance, required tire clearance, and load requirements with the jack manual. If any one falls outside the jack’s stated limits, choose a different lifting system.
