If you already own Ryobi 18V ONE+ tools, the charger matters as much as the battery. This guide compares 10 current charger and charger-kit listings for the Ryobi One Plus 18-volt platform, using only the manufacturer-listed details supplied for each product. Prices in this set run from $10.50 to $73.03. Some units are chargers only. Two are battery-and-charger kits, which only make sense if you also need cells.
The listings split into three groups: official Ryobi or TTI PCG-series chargers, compatible P117-style chargers, and kits that add one or more batteries. Chemistry support is not universal. Several compatible chargers list lithium-ion plus NiCad/NiMh. Others, including the official dual-port unit, list lithium-ion only. A few also warn that they do not fit 12V or 14.4V lithium packs.
Quick Verdict
Choose by port count, chemistry, and whether you need batteries in the box. Do not buy on brand name alone.
- Official dual-port lithium charging: RYOBI ONE+ 18V Dual-Port Simultaneous Charger PCG005. The manufacturer lists two-at-once charging, up to 2X faster charging than the PCG002, Energy Save Mode, and compatibility with all RYOBI ONE+ 18V lithium-ion batteries.
- Lowest-price official charger: RYOBI ONEAND 18V Lithium-ION Charger PCG002 at $10.50. Listed details are thin, so treat it as a basic official single charger, not a feature-rich pick.
- Dual-chemistry single charger: Biswaye P117. The manufacturer lists 18V/2A lithium output, 12V-18V/1.5A NiCd output, a 6.0Ah charge in 3 hours or less, and a cooling system.
- Compatible dual-port for mixed chemistries: Powilling P117 replacement. It is listed as charging two lithium, NiCad, or NiMh 18V batteries at once.
- Compatible dual-port for lithium only: Leisuda P117 Dual. Lower priced than the official dual-port, but the manufacturer says it is not for NiCd or NiMh packs.
- Need a battery as well: the RYOBI 2.0Ah battery-and-charger kit if you want an official 2.0Ah pack with listed sub-one-hour charging, or the Ziment combo if you want two listed 6.0Ah packs plus a 2-port charger.
Skip every third-party P117 if you only want official Ryobi hardware. Skip every kit if you only need a charger.
How We Chose
This is an editorial comparison of the supplied specifications, compatibility notes, and kit contents. CarTechTalk did not laboratory-test, install, or time these chargers. No customer-review excerpts were included in the product data, so this guide does not use review sentiment.
We sorted the 10 listings by what the manufacturer actually states: official versus compatible branding, single versus dual port, lithium-only versus dual chemistry, charger-only versus battery kit, listed output or charge-time claims, safety certifications, and stated exclusions such as 12V/14.4V lithium or NiCd/NiMh. Products with almost no functional text stay in the set, but they are not treated as fully documented options.
Some links below are affiliate links, and CarTechTalk may earn a commission if you buy through them, at no extra cost to you.
Pros
- Works across the RYOBI 18V ONE+ System
- Includes both the battery and charger
- Fast charging time of less than one hour is specified
- Battery is described as suitable for extreme-weather performance
Cons
- The supplied data does not specify the exact runtime in hours
- The supplied data does not identify the included charger model or charging specifications
- The supplied data does not provide detailed operating-temperature limits
The RYOBI ONE+ kit includes a 2.0Ah 18V lithium-ion battery and charger. It is described as 100% compatible with the RYOBI 18V ONE+ System, which includes 225 tools for applications such as drilling, cutting, lighting, trimming, mowing, and clearing.
The battery is described as offering up to 1.5x more runtime and charging from 0% to 100% in less than an hour. IntelliPort technology is identified as helping conserve energy, protect battery cells, and maximize battery life. The supplied data also describes performance in extreme weather, but does not provide specific temperature limits.
Detailed Review
What stands out in the currently available product data:
- Compatible with the RYOBI 18V ONE+ System
- Designed for use with 225 RYOBI ONE+ tools
- Includes a 2.0Ah lithium-ion battery and charger
- Charges from 0% to 100% in less than an hour
- IntelliPort technology is described as conserving energy and protecting battery cells
- Cordless design avoids power cords and extension cords
Best For / Avoid If
Best for buyers prioritizing
- Works across the RYOBI 18V ONE+ System
- Includes both the battery and charger
- Fast charging time of less than one hour is specified
Consider another option if
- The supplied data does not specify the exact runtime in hours
- The supplied data does not identify the included charger model or charging specifications
- The supplied data does not provide detailed operating-temperature limits
Pros
- Broad compatibility with select Ryobi 18V ONE+ battery types
- Supports both lithium-ion and NiCd battery chemistries
- 100-240V AC input supports a wide input-voltage range
- Compact design and plastic-free minimalist carton packaging
- Listed as meeting FCC, RoHS and CE safety standards
Cons
- 12V and 14.4V lithium batteries are not supported
- Compatibility is limited to the battery models listed by the seller
- The supplied data does not include a detailed specifications array
The Biswaye P117 is a replacement battery charger compatible with select Ryobi 18V ONE+ lithium-ion, NiCd and NiMH batteries, including models such as P102, P103, P104, P105, P106, P107, P108, P109, P100, P122, P161, P189, P190, P191 and P197, as well as select HP batteries including PBP005 and PBP002. It also supports Ryobi 12V and 14.4V NiCd/NiMH batteries. The charger does not fit 12V or 14.4V lithium batteries.
Input is rated at 100-240V AC. Output is listed as 18V/2A for lithium-ion batteries and 12V-18V/1.5A for NiCd batteries. The seller states that it can fully charge a 6.0Ah 18V battery in 3 hours or less. Features include LED charging and maintenance indicators, a built-in cooling system, and current, voltage and temperature control. The charger is also listed as a replacement for Ryobi charger models P117, P118, P118B, P135 and P166, along with part numbers 140237023 and 140153004.
The product is listed as meeting FCC, RoHS and CE safety standards.
Detailed Review
What stands out in the currently available product data:
- Supports select Ryobi 18V ONE+ lithium-ion, NiCd and NiMH batteries
- Also supports Ryobi 12V and 14.4V NiCd/NiMH batteries
- Provides 18V/2A output for lithium-ion batteries
- Provides 12V-18V/1.5A output for NiCd batteries
- Can fully charge a 6.0Ah 18V battery in 3 hours or less
- Includes LED charging and maintenance-status indicators
Best For / Avoid If
Best for buyers prioritizing
- Broad compatibility with select Ryobi 18V ONE+ battery types
- Supports both lithium-ion and NiCd battery chemistries
- 100-240V AC input supports a wide input-voltage range
Consider another option if
- 12V and 14.4V lithium batteries are not supported
- Compatibility is limited to the battery models listed by the seller
- The supplied data does not include a detailed specifications array
Pros
- Clearly identified as an 18V lithium-ion charger
- RYOBI brand and PCG002 model are provided
- Product category is specified as Battery Chargers
Cons
- Detailed specifications were not provided
- Battery compatibility information was not provided
- The supplied data lists 0 customer reviews
The RYOBI ONEAND 18V Lithium-Ion Charger PCG002 is listed as a battery charger for lithium-ion batteries. The supplied product data identifies RYOBI as the brand, PCG002 as the model, and 18V as the charging designation.
Detailed specifications, compatibility information, and a product description were not provided. The current listed price is $10.50, and the source data shows an Amazon rating of 4.7 from 0 reviews.
Detailed Review
What stands out in the currently available product data:
- RYOBI brand
- PCG002 model designation
- 18V charging designation
- Designed for lithium-ion batteries
- Listed in the Battery Chargers category
- Current listed price of .50
Best For / Avoid If
Best for buyers prioritizing
- Clearly identified as an 18V lithium-ion charger
- RYOBI brand and PCG002 model are provided
- Product category is specified as Battery Chargers
Consider another option if
- Detailed specifications were not provided
- Battery compatibility information was not provided
- The supplied data lists 0 customer reviews
Pros
- Supports two battery chemistries: lithium-ion and Ni-Cd
- Covers a range of Ryobi 18V battery models
- Provides multiple LED status indications
- Includes listed safety certifications and built-in safeguards
Cons
- Not compatible with Ryobi 12V Ni-Cd batteries
- The source data does not provide charging time, output specifications, or dimensions
- The source data does not include customer review excerpts
The Energup P117 replacement charger is listed for Ryobi 18V MAX ONE+ batteries and supports both lithium-ion and Ni-Cd chemistry. Compatible battery models include P100, P101, P102, P103, P104, P105, P106, P107, and P108. The listing also references Ryobi charger part numbers 140237023 and 140153004.
LED indicators identify standby, charging, fully charged, and defective-battery conditions. The charger is listed as CE, FCC, and RoHS certified, with built-in safeguards against over-discharge, overload, and short circuit. It is not compatible with Ryobi 12V Ni-Cd batteries.
The listing states that the product includes a 45-day money-back policy and a 13-month warranty. Charging time, output specifications, dimensions, and connector details are not provided in the source data.
Detailed Review
What stands out in the currently available product data:
- Supports Ryobi 18V lithium-ion and Ni-Cd batteries
- Compatible with Ryobi battery models P100, P101, P102, P103, P104, P105, P106, P107, and P108
- LED indicators show standby, charging, full, and defective-battery statuses
- Listed as supporting quick charging
- Built-in safeguards against over-discharge, overload, and short circuit
- CE, FCC, and RoHS certified according to the listing
Best For / Avoid If
Best for buyers prioritizing
- Supports two battery chemistries: lithium-ion and Ni-Cd
- Covers a range of Ryobi 18V battery models
- Provides multiple LED status indications
Consider another option if
- Not compatible with Ryobi 12V Ni-Cd batteries
- The source data does not provide charging time, output specifications, or dimensions
- The source data does not include customer review excerpts
Pros
- Supports multiple specified Ryobi ONE+ battery chemistries and models
- Offers separate output ratings for lithium-ion versus Ni-MH and Ni-Cd batteries
- Includes multiple charging-status and fault indicators
- Includes a 60-day money-back guarantee and 12-month warranty according to the supplied listing
Cons
- Does not fit 12V or 14.4V lithium batteries
- The supplied data does not provide a complete specifications list
- The listing states a full charge for a 6.0Ah 18V lithium battery in 3 hours or less, but charging time may vary by battery and conditions
The Gonocop replacement charger is listed for specified Ryobi ONE+ 18V lithium-ion, Ni-Cd and Ni-MH batteries, including models P102, P103, P104, P105, P106, P107, P108, P109, P100, P122, P161, P189, P190, P191, P197, PBP002 and PBP005. It also supports specified Ryobi 12V and 14.4V Ni-Cd and Ni-MH batteries, but it does not fit 12V or 14.4V lithium batteries.
The charger is listed as a replacement for Ryobi P117, P118, P118B, P135, P166, 140237023 and 140153004 chargers. It accepts 100V-240V input and provides 12V-18V output at 2A for lithium-ion batteries or 1.5A for Ni-MH and Ni-Cd batteries. The listing states that a 6.0Ah 18V lithium battery can be fully charged in 3 hours or less.
LED indicators identify power, defective-battery, abnormal-temperature, charging and charged states. Listed protection measures include overheat, overcurrent, overload, overcharge and short-circuit protection. The supplied warranty information includes a 60-day money-back guarantee and a 12-month warranty.
Detailed Review
What stands out in the currently available product data:
- Compatible with specified Ryobi ONE+ 18V lithium-ion, Ni-Cd and Ni-MH batteries
- Also supports specified Ryobi 12V and 14.4V Ni-Cd and Ni-MH batteries
- Replacement for Ryobi P117, P118, P118B, P135 and P166 chargers
- 100V-240V input supports use with compatible power systems
- Provides up to 2A output for lithium-ion batteries and 1.5A for Ni-MH and Ni-Cd batteries
- LED indicators show power, charging, charged, defective and abnormal-temperature statuses
Best For / Avoid If
Best for buyers prioritizing
- Supports multiple specified Ryobi ONE+ battery chemistries and models
- Offers separate output ratings for lithium-ion versus Ni-MH and Ni-Cd batteries
- Includes multiple charging-status and fault indicators
Consider another option if
- Does not fit 12V or 14.4V lithium batteries
- The supplied data does not provide a complete specifications list
- The listing states a full charge for a 6.0Ah 18V lithium battery in 3 hours or less, but charging time may vary by battery and conditions
Pros
- Dual-battery charging can reduce charging downtime
- Supports multiple Ryobi 18V ONE+ battery chemistries
- Includes charge-status diagnostics and protection features
- Universal 100V-240V input is specified
Cons
- Not compatible with 12V or 14.4V lithium batteries
- Compatibility is limited to the listed Ryobi 18V battery models
- The supplied product data does not specify charging times or individual output details
The Powilling P117 is a replacement dual charger for select Ryobi 18V ONE+ batteries. The supplied compatibility information includes Ryobi battery models P100, P101, P102, P103, P104, P105, P107 and P108, along with support for lithium, NiCad and NiMH battery chemistries.
The charger can charge two batteries at the same time and uses 100V-240V input. LED indicators communicate battery charge status, while the product description lists multi-protection features and a cooling system. It is not specified for 12V or 14.4V lithium batteries. Powilling lists a 45-day money-back period and a 12-month warranty.
Specifications
| Color | GREEN |
|---|---|
| Dimensions | 9.7 x 6.5 x 3.7 inches |
| Product Group | Electronics |
| Binding | Electronics |
Verify the current product variation before purchase; specifications may change.
Detailed Review
What stands out in the currently available product data:
- Charges two compatible Ryobi 18V batteries at the same time
- Compatible with select Ryobi 18V ONE+ lithium, NiCad and NiMH batteries
- Supports Ryobi battery models P100, P101, P102, P103, P104, P105, P107 and P108
- Uses universal 100V-240V voltage input
- LED indicators communicate battery charge status
- Includes multi-protection features and a cooling system
Best For / Avoid If
Best for buyers prioritizing
- Dual-battery charging can reduce charging downtime
- Supports multiple Ryobi 18V ONE+ battery chemistries
- Includes charge-status diagnostics and protection features
Consider another option if
- Not compatible with 12V or 14.4V lithium batteries
- Compatibility is limited to the listed Ryobi 18V battery models
- The supplied product data does not specify charging times or individual output details
Pros
- Charges two compatible lithium-ion batteries simultaneously
- Broad compatibility with listed Ryobi ONE+ 14.4V and 18V battery models
- Universal AC 100-240V input is specified
- Includes LED status indicators and multiple protection features
Cons
- Not compatible with NiCd or NiMH batteries
- Compatibility is limited to supported 14.4V and 18V lithium-ion batteries
- The supplied data does not include charging times or a complete specification list
The Leisuda P117 is a dual-port replacement charger for compatible Ryobi ONE+ 14.4V and 18V lithium-ion batteries. It is listed with AC 100-240V, 50/60Hz input and 20V MAX 2A output, and supports battery models including P100, P101, P102, P103, P104, P105, P107, and P108. The charger includes LED charging-status indicators, a built-in cooling system, and protection against overcharging, overvoltage, overheating, overcurrent, over-discharge, and short circuits. It is not applicable to NiCd or NiMH batteries.
Specifications
| Dimensions | 7.7 x 3.9 x 3.5 Inches |
|---|---|
| Product Group | Lawn & Patio |
Verify the current product variation before purchase; specifications may change.
Detailed Review
What stands out in the currently available product data:
- Dual-port design can charge two compatible 14.4V-18V lithium-ion batteries at the same time
- Compatible with Ryobi ONE+ battery models including P100, P101, P102, P103, P104, P105, P107, and P108
- Supports AC 100-240V, 50/60Hz input and 20V MAX 2A output
- LED indicators display battery charging status
- Built-in cooling system supports heat dissipation during charging
- Includes overcharge, overvoltage, overheating, overcurrent, over-discharge, and short-circuit protection
Best For / Avoid If
Best for buyers prioritizing
- Charges two compatible lithium-ion batteries simultaneously
- Broad compatibility with listed Ryobi ONE+ 14.4V and 18V battery models
- Universal AC 100-240V input is specified
Consider another option if
- Not compatible with NiCd or NiMH batteries
- Compatibility is limited to supported 14.4V and 18V lithium-ion batteries
- The supplied data does not include charging times or a complete specification list
Pros
- Two 6.0Ah batteries are included
- Two-port charger can charge two batteries
- Broad listed compatibility with Ryobi 18V ONE+ tools and battery models
- CE, FCC, and RoHS certifications are stated
Cons
- This is a replacement battery and charger set rather than an original Ryobi-branded kit
- Compatibility is limited to the listed Ryobi 18V battery and ONE+ tool systems
- The supplied data does not provide additional specifications for the product's unspecified specifications array
The Ziment replacement kit includes two 18V 6000mAh lithium-ion batteries and a two-port P117 18V battery charger. The batteries are listed as replacements for Ryobi 18V battery models P102, P103, P104, P105, P107, P108, and P109, and the kit is described as compatible with Ryobi 18V ONE+ system cordless power tools.
The charger has an AC 100-240V, 50/60Hz input and a stated 20V MAX 2A output. Battery and charger LED indicators show battery level and charging status. The supplied data states that the kit has CE, FCC, and RoHS certifications, along with protections against overheating, overcurrent, overloading, overcharging, and short circuits.
Detailed Review
What stands out in the currently available product data:
- Includes two 18V 6.0Ah lithium-ion batteries
- Includes a two-port P117 replacement charger
- Listed as compatible with Ryobi 18V ONE+ cordless power tools
- Supports Ryobi battery models P102, P103, P104, P105, P107, P108, and P109
- Battery and charger include built-in LED indicators
- Charger input supports AC 100-240V at 50/60Hz
Best For / Avoid If
Best for buyers prioritizing
- Two 6.0Ah batteries are included
- Two-port charger can charge two batteries
- Broad listed compatibility with Ryobi 18V ONE+ tools and battery models
Consider another option if
- This is a replacement battery and charger set rather than an original Ryobi-branded kit
- Compatibility is limited to the listed Ryobi 18V battery and ONE+ tool systems
- The supplied data does not provide additional specifications for the product's unspecified specifications array
Pros
- Charges two compatible batteries at the same time
- Includes clear LED status indicators
- Supports all RYOBI ONE+ 18V lithium-ion batteries
- Offers an automatic energy-save mode
Cons
- Compatibility is limited to RYOBI ONE+ 18V lithium-ion batteries
- The supplied data does not include specific charging times
- The supplied data does not list detailed electrical specifications
The RYOBI ONE+ PCG005 is an 18V dual-port battery charger that charges two RYOBI ONE+ 18V lithium-ion batteries simultaneously. RYOBI states that it provides up to 2X faster charging compared with the PCG002 standard charger. LED indicators display charging status, full charge, and issues, while energy-save mode conserves power when the charger is not in use. The charger is compatible with all RYOBI ONE+ 18V lithium-ion batteries and integrates with the RYOBI ONE+ system of over 300 compatible tools.
Detailed Review
What stands out in the currently available product data:
- Simultaneously charges two RYOBI ONE+ 18V batteries
- Provides up to 2X faster charging compared with the PCG002 standard charger
- Energy-save mode automatically conserves power when the charger is not in use
- LED indicators show charging status, full charge, and issues
- Compatible with all RYOBI ONE+ 18V lithium-ion batteries
- Integrates with the RYOBI ONE+ system of over 300 compatible tools
Best For / Avoid If
Best for buyers prioritizing
- Charges two compatible batteries at the same time
- Includes clear LED status indicators
- Supports all RYOBI ONE+ 18V lithium-ion batteries
Consider another option if
- Compatibility is limited to RYOBI ONE+ 18V lithium-ion batteries
- The supplied data does not include specific charging times
- The supplied data does not list detailed electrical specifications
Recommendations
Each pick below has a different job. Manufacturer-listed claims are labeled as such. Where a listing is incomplete, that gap is the main reason not to buy it.
RYOBI PCG005 Dual-Port Simultaneous Charger
Best for: owners who want an official Ryobi charger that can charge two 18V ONE+ lithium-ion batteries at once.
The manufacturer lists dual-port charging, up to 2X faster charging than a standard PCG002, Energy Save Mode when the unit is idle, LED indicators for charge status and faults, and use with all RYOBI ONE+ 18V lithium-ion batteries. It also lists integration with an expandable system of more than 300 tools. At $73.03, it is the most expensive charger-only option in this set.
Avoid if: you need NiCad or NiMh charging, or you only want to spend charger money. The listing does not claim dual-chemistry support. A compatible dual-port unit costs less if official branding is not required.
RYOBI PCG002 Lithium-Ion Charger
Best for: a low-cost official single charger when you already have one good 18V lithium pack and do not need dual ports.
This is the $10.50 RYOBI-branded PCG002. The supplied feature text does not describe charge current, charge time, chemistry range, or indicators. The PCG005 listing is the only source in this set that compares speed against the PCG002, calling the dual-port unit up to 2X faster.
Avoid if: you need documented output, dual-port charging, or dual chemistry. Buy this only if official branding and the low price are enough.
TTI PCG002 Bulk Charger
Best for: the same PCG002 model number in TTI branding when you do not need retail packaging.
The listing identifies it as a TTI 18-volt Ryobi charger PCG002 with no retail packaging and bulk packaging. Price is $15.98. No output, indicator, or compatibility notes were supplied.
Avoid if: you want a boxed retail unit or any documented feature set. The RYOBI-branded PCG002 is cheaper in this set and at least carries the Ryobi name on the listing.
Biswaye P117 Fast Charger
Best for: a single-port compatible charger that the manufacturer lists for both lithium-ion and NiCd 18V packs.
Biswaye lists 100-240V AC input, 18V/2A output for Li-ion, 12V-18V/1.5A output for NiCd, a full charge of a 6.0Ah 18V battery in 3 hours or less, a built-in cooling system, and active control of current, voltage, and temperature. It lists compatibility with a long run of 18V ONE+ lithium, NiCad, and NiMh packs, plus 12V/14.4V ONE+ NiCad/NiMh packs. It also says it does not fit 12V/14.4V lithium batteries. LED status lighting, compact size, and FCC, RoHS, and CE marks are listed. Price is $20.99.
Avoid if: you want two batteries charging at once, or you will only accept official Ryobi hardware.
Energup P117 Dual-Chemistry Charger
Best for: another single-port P117-style charger with a listed 13-month warranty.
Energup lists dual-chemistry charging for Ryobi 18V lithium-ion and NiCad batteries, replacement for P117/P118 and related part numbers, LED status lighting, and CE/FCC/RoHS certification. Compatible pack numbers include P100 through P108. The manufacturer says it is not for Ryobi 12V Ni-Cad batteries. Service terms in the listing are 45 days money back and 13 months warranty. Price is $19.99.
Avoid if: you need dual-port charging or 12V Ni-Cad support. Functionally it overlaps the Biswaye and Gonocop singles.
Gonocop P117 Rapid Charger
Best for: a dual-chemistry single charger whose listing spells out LED meanings.
Gonocop lists the same broad 18V lithium/NiCad/NiMh compatibility family as other P117-style units, plus 12V/14.4V NiCad/NiMh and a warning not to use 12V/14.4V lithium packs. Output is listed as 12V-18V 2A for Li-ion and 1.5A for Ni-MH and Ni-CD, with a 6.0Ah 18V lithium charge in 3 hours or less. LED codes are listed as steady red for power on, flashing red for defective, flashing yellow for abnormal temperature, flashing green for charging, and steady green for charged. Multiple protections and a 60-day money-back / 12-month warranty note are included. Price is $20.99.
Avoid if: you need two charge bays. Choose this over the other singles only if the LED legend matters to you.
Powilling Dual P117 Replacement
Best for: charging two 18V lithium, NiCad, or NiMh batteries at the same time without buying the official dual-port unit.
Powilling lists a dual charger, 100V-240V input, compatibility with Ryobi 18V lithium, NiCad, and NiMh packs such as P100-P105, P107, and P108, LED diagnostics, multiple protections, and a cooling system. It says it replaces P117, P118, and P119 and does not fit 12V and 14.4V lithium batteries. Service terms are 45 days money back and 12 months warranty. Price is $32.99.
Avoid if: you only have lithium packs and want official Ryobi firmware and branding, or you only ever charge one battery.
Leisuda Dual-Port P117 Charger
Best for: a lower-priced dual-port station when every pack you own is 14.4V-18V lithium-ion.
Leisuda lists AC 100-240V input, 20V MAX 2A output, replacement for P117/P118/P119, two-bay charging, a cooling system, LED status lights, a compact housing, and CE, FCC, and ROHS marks. Compatible examples include P100-P105, P107, and P108. The manufacturer states it is not applicable to NiCd or NiMh batteries. Price is $27.99.
Avoid if: you still use older NiCad or NiMh ONE+ packs. In that case the Powilling dual-port listing is the better chemistry match.
RYOBI 2.0Ah Battery and Charger Kit
Best for: buyers who need an official 2.0Ah 18V lithium-ion battery and a charger in one purchase.
Ryobi lists ONE+ compatibility across 225 tools, cordless fade-free power, up to 1.5x more runtime, charging from 0 to 100 in less than an hour, IntelliPort technology for energy conservation and cell protection, and extreme-weather performance. Price is $50.00. The listing does not name the charger model inside the kit.
Avoid if: you only need a charger. Paying kit money for a 2.0Ah pack you do not need is a poor match. People who want higher listed capacity should look at the Ziment combo instead.
Ziment 6.0Ah Two-Pack and 2-Port Charger Combo
Best for: replacing both batteries and a charger when the manufacturer-listed 6.0Ah capacity and two-bay charger are the point of the purchase.
Ziment lists two 18V 6000 mAh lithium-ion batteries, a 2-port P117-style charger with AC 100-240V input and 20V MAX 2A output, LED indicators on the battery and charger, compatibility with packs such as P102-P105 and P107-P109, and CE, FCC, and ROHS certification. It also lists protections against overheating, overcurrent, and related faults. Price is $72.99, almost the same as the official PCG005 charger alone.
Avoid if: you already have healthy batteries. This is not a charger-only deal.
Compatibility and Buying Advice
Match chemistry before you match price. Official RYOBI PCG005 text covers 18V ONE+ lithium-ion batteries only. Leisuda also limits itself to lithium and excludes NiCd and NiMh. Biswaye, Powilling, Energup, and Gonocop list dual chemistry, with small differences in 12V notes. Biswaye and Gonocop say they can charge 12V/14.4V NiCad or NiMh but not 12V/14.4V lithium. Energup says it is not for Ryobi 12V Ni-Cad. Powilling says it does not fit 12V and 14.4V lithium.
If your drawer still has older NiCad slides, a lithium-only charger is the wrong buy even when the voltage stamp says 18V. If every pack is a modern 18V lithium ONE+ battery, official or lithium-only compatible chargers are enough on paper.
Dual-port units only help when you regularly empty two packs. The official PCG005, Powilling, Leisuda, and the Ziment kit charger are the dual-bay options in this set. Single-port P117-style units and the PCG002 listings are one-battery chargers.
Several compatible chargers list 100-240V input, which matters if the charger may travel. The official PCG002 and TTI listings do not include input-voltage text in the supplied data.
| Product | Brand | Price | Manufacturer-listed role |
|---|---|---|---|
| P117 18V Battery Fast Charger | Biswaye | $20.99 | Single-port dual-chemistry P117-style charger |
| P117 Replacement Dual Charger | Powilling | $32.99 | Dual-port dual-chemistry P117-style charger |
| 18V Battery and Charger Combo | Ziment | $72.99 | Two 6.0Ah batteries plus 2-port charger |
| ONEAND 18V Lithium-ION Charger PCG002 | RYOBI | $10.50 | Official single charger; functional specs not provided |
| One+ 18V 2.0Ah Battery and Charger Kit | RYOBI | $50.00 | Official 2.0Ah battery plus charger kit |
| 18V P117 Replacement Charger | energup | $19.99 | Single-port dual-chemistry P117-style charger |
| 18-Volt P117 Rapid Charger | Gonocop | $20.99 | Single-port dual-chemistry P117-style charger |
| P117 Dual 18V Charger | Leisuda | $27.99 | Dual-port lithium-only P117-style charger |
| ONE+ 18V Dual-Port Charger PCG005 | RYOBI | $73.03 | Official dual-port lithium-ion charger |
| 18-Volt Ryobi Charger PCG002, bulk | TTI | $15.98 | PCG002 charger, no retail packaging; specs not provided |
How to Choose
- Decide official versus compatible. Official RYOBI and TTI listings stay inside the branded system. Compatible P117 units list replacement part numbers such as P117, P118, P118B, P119, P135, and P166, but they are still third-party hardware.
- Count the batteries you drain in a session. One spare pack is a single-port job. Two packs argue for PCG005, Powilling, Leisuda, or the Ziment two-bay kit.
- Read the chemistry line, not just 18V. Lithium-only chargers should not be asked to service NiCad or NiMh packs when the listing excludes them.
- Do not buy a kit for the charger alone. The $50 Ryobi kit and $72.99 Ziment combo only pay off if you need the included batteries.
- Use listed charge-time claims as claims, not test results. Sub-one-hour charging appears only on the official 2.0Ah kit. The 3-hour-or-less 6.0Ah figure appears on Biswaye and Gonocop. PCG005 is listed as up to 2X faster than PCG002, without a minute count.
- Prefer listings that name protections and certifications if you want that paperwork on the page. Several compatible units list CE, FCC, and RoHS plus over-current, over-temperature, or short-circuit protection. The official PCG002 and TTI pages in this set do not.
FAQ
Can a compatible P117 charger replace an official Ryobi charger?
The Biswaye, Energup, Gonocop, Powilling, Leisuda, and Ziment listings all present their chargers as P117-style replacements and name overlapping 18V ONE+ pack numbers. That is manufacturer compatibility language, not a CarTechTalk test of every pack and firmware revision.
Will these chargers charge 12V or 14.4V lithium batteries?
Several compatible listings say they will not. Biswaye, Gonocop, and Powilling warn against 12V/14.4V lithium. Energup says it is not for Ryobi 12V Ni-Cad. Confirm the exact exclusion on the unit you buy.
Do I need a dual-port charger?
Only if you want two batteries on the charger at the same time. The official PCG005, Powilling, Leisuda, and Ziment charger are the dual-bay options here. A single-port charger is enough for one spare pack.
What do the lights mean?
Most listings only say that LEDs show charge or fault status. Gonocop is the exception in this set and publishes a full color-and-flash legend. Other brands do not supply that map in the data used here.
Is the cheapest official charger the safer buy?
The RYOBI PCG002 is the lowest price, but its supplied listing does not document output, protections, or indicators. Safety certifications and protection lists appear more often on the compatible P117 pages. Official branding and documented safeguards are not the same thing in this data set.
Final Verdict
For an official two-bay lithium charger, the RYOBI PCG005 is the listing that actually documents simultaneous charging and a speed claim versus the PCG002. For a cheap official single bay, the RYOBI PCG002 is the price leader, with the TTI bulk PCG002 as a no-box alternative. For mixed lithium and nickel chemistries, use a dual-chemistry P117: Biswaye or Gonocop for one bay, Powilling for two. For lithium-only dual charging on a smaller budget, Leisuda is the compatible option. Buy the Ryobi 2.0Ah kit or the Ziment 6.0Ah combo only when you need the batteries that come in the box.
